Daedong CK2610CHSE, Manual

Page: 81 / 246

4
4
-
1
function description and operating tips
to avoid injury:
never clean the tractor body
while the engine is running.
•
caution
5. run the engine for 3 to 4 minutes.
then, press the activation portion
of the regeneration switch for ap-
prox. 2 seconds.
deactivation (lower portion
oF switch)
do not press the deactivation portion
of the switch while the regeneration
process is activated.
however, the switch can be set to
the deactivation position to stop the
regeneration process in emergency.
6. the regeneration warning lamp
goes off and the regeneration pro-
cess lamp blinks.
before resuming your work, wait
for approx. 30 to 40 minutes until
the regeneration process is com-
pleted.
the illumination timing of the
regeneration process lamp may
differ depending on the dpf
temperature.
•
note
to protect the catalyst filter,
keep the followings:
make sure to use only genuine
fuel.
Keep the engine oil change
schedule.
check the engine oil level fre-
quently to keep it to the speci-
fied level.
avoid any unnecessary engine
idling.
never stop the engine during
driving.
never place the shift lever in
the neutral position when driv-
ing downhill.
do not use any engine oil ad-
ditive or fuel additive.
avoid driving with any warn-
ing lamp illuminated.
do not allow any flammable
materials, such as dry grass
and paper, to come near the
catalyst filter while parked.
•
•
•
•
•
•
•
•
•
caution
TC220-영문-수출향(법인향)-OM-04.indd 13 2020-12-10 오전 10:45:34