Daedong CK2610CHSE, Manual

Page: 132 / 246

5
-
ck2610cHSe / ck3510(H,c,cH)Se / ck4010(H,c,cH)Se
1. Start the engine and idle the en-
gine at a low speed for 3 to 4 min-
utes in advance.
2. increase the idling time in cold
weather.
3. do not drive the tractor at the max-
imum speed on a road.
4. never apply excessive load during
work.
5. idle the engine at a low speed for
2 to 3 minutes before stopping it.
PRE-OPERATION CHECK
• Walk around inspection.
• engine oil level.
• transmission oil level.
• coolant level.
• clean the front grill and radiator
screen.
• air cleaner element.
• Brake pedal free play.
• all dash gauges and indicators.
• Head lights, tail lights, and working
lights.
• accessible wiring harness for any
damage.
• Seat belt, ropS and cabin for
damage.
• Fuel level.
• all “danger” and “Warning”
decals.
• tire pressure and wheel bolt tight-
ness condition.
For detailed information, refer to
“Maintenance schedule chart” in
chapter 7.
it is a good practice to know the con-
dition of your tractor before you start
it. you should do routine check before
each use.
driving a new tractor at a high speed
or under heavy load can affect its du-
rability.
Make sure to run the tractor at the
proper work load and speed for the
initial operation of 10 to 20 hours.
INITIAl OPERATION
CHECK ITEms
TIPs fOR bREAKING-IN
Park the tractor on the level
ground, stop the engine, and
apply the parking brake before
checking or repairing it.
Refer to "Daily check item" in
Chapter "maintenance" for fu-
eling.
be sure to read and under-
stand the information titled as
“DANGER”, “WARNING”, and
“CAUTION” thoroughly for the
safe operation.
•
•
•
CAUTION
TC220-영문-수출향(법인향)-OM-05.indd 2 2020-01-23 오전 9:15:29