Daedong CK2610CHSE, Manual

Page: 38 / 246

1
-
26 ck3510(h,c,ch)se / ck4010(h,c,ch)se
• hitch loads to the drawbar only.
towing or attaching to other loca-
tions may cause the tractor to over-
turn.
• improper use of the drawbar, even
if correctly positioned, can cause a
rear overturn.
• do not overload an attachment
or towed equipment. use proper
counterweights to maintain tractor
stability. hitch heavy loads to the
drawbar only.
tG2o111a
• check for correct coupling between
tow hook and trailer. see the tow-
ing attachments section.
• use ballast weight as recom-
mended. never add more ballast
to compensate a higher load than
allowed. reduce load.
• keep work surfaces and engine
compartments clean.
• Before cleaning the machine, al-
ways lower implements to the
ground, engage the first gear, en-
gage the parking brake, turn the
engine off and remove the key.
• Always use specific personal safety
devices for each service operation.
• Clean steps, pedals and floor. Re -
move grease or oil. Brush away
dust or mud. in winter, scrape away
snow and ice. remember - slippery
surfaces are dangerous.
• avoid using petrol, paraffin, paint
thinner etc. when cleaning plastic
parts, e.g.; console, instrument
cluster, monitors and gauges etc.
use onlY water, mild soap and
a soft cloth when you clean these
parts. using petrol, paraffin, paint
thinner etc., will cause cracking
or deformation of the part being
cleaned.
• remove and put away any tools,
buckets, chains and hooks.
clEANINg ThE TRAcTOR
TC220-BOBCAT-OM-01.indd 26 2020-02-20 오후 2:49:15