Daedong CK2610CHSE, Manual

Page: 195 / 246

57
7
-
1
maintenance
(1) Drain Plug
1. remove the drain plugs from the
front axle case (lh/rh) and front
axle support to drain oil.
2. after draining, reinstall the drain
plugs securely.
3. remove the bleeding plug from the
front axle case and add oil through
the filler hole.
ChANGING FRONT AxlE CAsE OIl (N)
tC2O709A
OIl CAPACITy
5.8 u.s.gal. (22 l)
To avoid injury:
Be sure to stop the engine
before changing the fluid or
replacing the filter.
Cool down the fluid sufficient
-
ly. you can get burnt by hot
fluid.
•
•
CAUTION
To prevent serious damage to
the hydraulic system, use only
a KIOTI genuine filter.
Do not operate the tractor
immediately after changing
transmission fluid. Run the
engine at medium speed for a
few minutes to prevent dam-
age to the hydraulic system.
•
•
IMPORTANT
4. add oil while checking the oil level
with the dipstick attached to the
filler plug. (Refer to the instructions
for the lubrication system in chap-
ter maintenance.)
5. after adding oil, fit the filler plug
again.
6. wait for 15 minutes and check the
oil level again. if the amount is in-
sufficient, add more oil.
(1) oil Dipstick
(a) upper limit
tC2O710A
OIl CAPACITy
1.6 u.s.gal. (6.0 l)
TC220-영문-수출향(법인향)-OM-07.indd 19 2020-01-23 오전 9:19:20