Daedong CK2610CHSE, Manual

Page: 187 / 246

57
7
-
11
maintenance
ChECkING AND ADDING FUEl (C)
1. turn the key switch to "on" and
check the amount of fuel with the fuel
gauge.
2. if the needle on the fuel gauge is
close to “e” or the fuel level is low,
open the fuel tank filler cap and add
the fuel.
3. after adding the fuel, close the fuel
tank filler cap.
To avoid personal injury:
Do not smoke while refueling.
Add fuel in a well-ventilated
area.
Be sure to stop the engine be-
fore refueling.
As dirt or sand contained in
fuel may cause malfunction to
the fuel injection pump, use
the strainer when refueling.
•
•
•
•
CAUTION
Be careful not to let the fuel
tank become empty. Otherwise
air will enter the fuel system,
necessitating bleeding before
next engine start.
Be careful not to spill during
refueling. If a spill occur, wipe
it off at once, or it may cause
a fire.
If unit is not used for a long
time, make sure the fuel vis-
cosity is suitable for the cold
weather.
•
•
•
IMPORTANT
ChECkING TRANsMIssION
FlUID lEVEl (D)
(1) oil Dipstick and filler Port
1. Park the tractor on a level ground
and lower the implement.
2. make sure the parking brake is
set.
3. set all shift levers into the neutral
position.
4. stop the engine.
t22O705A
TC220-영문-수출향(법인향)-OM-07.indd 11 2020-01-23 오전 9:19:16