Daedong CK2610CHSE, Manual

Page: 188 / 246

7
-
12
ck2610chse / ck3510(h,c,ch)se / ck4010(h,c,ch)se
tC2O703A
5. Pull out the oil dipstick, clean it,
and then insert it into its original
position. then, pull it out again and
check if the oil level is within the
specified range.
6. if the oil level is too low, add some
new oil so that the level is within
the allowable range.
(1) oil Dipstick
(a) upper limit
If the level is low, do not run
the engine.
Never add oil over the upper
limit.
Be sure to check the oil level
after installing a hydraulic im-
plement. Add fluid as needed.
Check the oil level with the
cylinders of an implement ex-
tended and check again with
the cylinders retracted. Add
oil to adjust the oil level within
the range of the oil limit. (Upper
or lower)
•
•
•
•
IMPORTANT
1. check the engine oil daily.
2. Park the tractor on a level ground
and lower the implement.
3. if the engine was just running,
wait for approx. 5 minutes before
checking the oil level.
(1) oil filler neck (2) oil Dipstick
(a) oil level is acceptable within this range
t22O706A
ChECkING ENGINE OIl lEVEl (E)
To avoid injury:
Be sure to stop the engine be-
fore checking the oil level.
•
CAUTION
TC220-영문-수출향(법인향)-OM-07.indd 12 2020-01-23 오전 9:19:17