1
SPARE PARTS
INSTRUCTIONS # 47
Date Created:
30/03/2017
Product:
Procut S3 (All Models)
Title:
Gearbox Pulley Removal and Replacement
SAFETY!
Before attempting to make any adjustments or carry out maintenance on the mower, review
the hazard identification table (section 3a of your Operator Manual) and take all necessary precautions.
Position the Procut S3 in the work
area.
Unlatch the Covers and remove
ALL
M8 Nyloc Nuts and M8 Flat Washers
used to retain the Covers.
Remove
ALL
Covers and carefully
place to one side.
Remove the P.T.O Cone form the
FRONT
of the Gearbox Assembly by
removing the four M8 x 16 Bolts and
M8 Flat Washers.
Place the P.T.O Cone and Fasteners to
one side for later refitment.
ALL MODELS
Slacken
ALL
Idler Mounting Nuts
and pivot the Idlers away from the
Belts to relieve belt tension.
One Idler shown in this example.
Note:
DO NOT
remove Idlers!
Remove P.T.O Cone
