Still LXT 120 Original Instructions Manual Download

Page: 149 / 324

NOTE

If the symbol appears in the display, the

truck cannot be driven until the electric parking

brake has been released by pressing the push

button (1). This is the case after starting the

truck or after the parking brake has been ap-

plied manually.

Actuation of the electric parking brake

when the industrial truck is in motion

Manual actuation when the industrial truck is

in motion

–

Press the push button (1).

The industrial truck is braked using the drive

unit in accordance with the selected drive pro-

gramme. Once the industrial truck has come

to a standstill, the electric parking brake is

applied with an audible sound. The LED (2)

lights up with a steady light. The symbol

appears in the display-operating unit.

–

If the braking effect is insufficient, also use

the service brake.

NOTE

If the drive unit fails, the industrial truck au-

tomatically brakes using the electric parking

brake.

WARNING

Risk of accident!
The industrial truck can slow down jerkily.

–

Fasten the seat belt.



Operation

Driving

137

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands