Still LXT 120 Original Instructions Manual Download Page 71

Page: 71 / 324

●

Key switch

●

Emergency off switch

●

Parking brake switch

●

Seat switch

●

Interlock switch of the battery door

If one of the interlock switches does not func-

tion correctly or safely, report it to a superior

or the responsible fleet manager immediately

so that they can have the defect rectified.

NOTE

Additional interlock switches may be fitted for

any attachments. These switches must be

checked for correct and safe operation.

Check the hydraulic oil level

Tow tractors

–

Open the rear flap. To do this, turn the slot-

ted screw (1) anti-clockwise and pull the

rear flap upwards.



Operation

Checks and tasks before daily use

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands