Still LXT 120 Original Instructions Manual Download

Page: 200 / 324

NOTE

Also observe the operating instructions sup-

plied with the HSM 2144 tow coupling by the

manufacturer and the information on the iden-

tification plate.

●

Warning: The information in the STILL op-

erating instructions applies in the event that

the information about the support load var-

ies.

Use

NOTE

The HSM 2140 tow coupling is compatible

with tow-bar eyes with a hole diameter of

40 mm, according to DIN 11026/ISO 5692-2,

DIN 11043 and DIN 74054/ISO 8755.

The HSM 2140 automatic tow coupling can

be mounted on the front and rear of the tow

tractor and the platform tractor. It can be used

with towed loads of up to 35 t.
It is available for the following truck variants:

●

LXT 120

●

LXT 180

●

LXT 250

●

LXT 350

●

LXW 20 with a short loading area

(2200 mm), front and rear mounting

●

LXW 30 with a short loading area

(2200 mm), front and rear mounting

●

LXW 20 with a long loading area

(2600 mm), front mounting only

●

LXW 30 with a long loading area

(2600 mm), front mounting only

Coupling trailers

–

Secure the trailer, for example using wheel

chocks, so that it cannot roll away.

–

Adjust the tow-bar eye of the tiller so that it

is in the middle of the towing jaws.

Operation

Trailer and load

188

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands