Still LXT 120, Original Instructions Manual

Page: 279 / 324

Preserving operational readiness
Maintaining the seat belt
DANGER
There is a risk to life if the seat belt fails during an
accident!
If the seat belt is faulty, it may tear or open during an
accident and no longer keep the driver in the driver's
seat. The driver may therefore be thrown against the
industrial truck components or out of the industrial
truck.
–
Ensure operational reliability by continually test-
ing.
–
Do not use the industrial truck if the seat belt is
faulty.
–
A faulty belt must only be replaced by your service
centre.
–
Only use genuine spare parts.
–
Do not make any changes to the belt.
NOTE
Carry out the following checks on a regular
basis (monthly). In the case of significant
strain, a daily check is necessary.
Checking the seat belt
–
Pull out the belt (3) completely and check it
for wear.
The belt must not be frayed or cut. The stitch-
ing must not be loose.
–
Check whether the belt is dirty.
–
Check whether parts are worn or damaged
(including the fixing points).
–
Check the buckle (1) to ensure that it locks
into place properly.
When the belt tongue (2) is inserted, the belt
must be held securely.
6327_342-009
1
2
3

Maintenance
5
Preserving operational readiness
267 50078078001 EN - 07/2022 - 04