Still LXT 120 Original Instructions Manual Download

Page: 214 / 324

Handling the lead-acid batteries

Safety regulations for handling

the battery

–

National statutory provisions for the country

of use must be followed when setting up

and operating battery charging stations.

CAUTION

Possible damage to the battery charger!
Incorrect connection or incorrect opera-

tion of the charging station or the battery

charger may result in damage to compo-

nents.

–

Follow the operating instructions for

the charging station or battery charg-

er and for the battery.

–

Observe the following safety regulations

when maintaining, charging and changing

the battery.

Maintenance personnel

Batteries must only be charged, maintained

and replaced by properly trained personnel

in accordance with the instructions compiled

by the manufacturers of the battery, battery

charger and industrial truck.

–

The handling instructions for the battery and

the operating instructions for the battery

charger must be observed.

–

Observe the following safety regulations

when maintaining, charging and changing

the battery.

Operation

Handling the lead-acid batteries

202

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands