Still LXT 120 Original Instructions Manual Download

Page: 211 / 324

Mechanically releasing the parking

brake

WARNING

Risk of the industrial truck rolling away when the

parking brake is released.

–

Secure the industrial truck with wheel chocks to

prevent it from rolling away. For information on

the storage location of the wheel chocks, see the

chapter entitled "Wheel chocks".

Tow tractor

–

Open the rear flap. To do this, turn the slot-

ted screw (1) anti-clockwise and pull the

rear flap upwards using the handle.

WARNING

Risk of damage to components!

–

Carefully guide the lever past the hydraulic hoses

and the cables.

–

Carefully guide the lever (2) over the hy-

draulic hoses between the axle and the hy-

draulic pump (4).

–

Mount the lever (2) on the bolt on the axle.

The lever is correctly mounted if it is in front

of the plate cut-out (3) and has some play.



Operation

Procedure in emergencies

199

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands