Still LXT 120, Original Instructions Manual

Page: 44 / 324

●
Tyres of inferior quality
●
Changing rim wheel parts
●
Combining rim wheel parts from different
manufacturers
The following rules must be observed to en-
sure safe handling:
●
Only use tyres with equal and permitted lev-
els of wear on the same axle.
●
Only use wheels and tyres of the same type
on the same axle, e.g. only superelastic
tyres.
●
Only use wheels and tyres approved by the
manufacturer.
●
Only use high-quality products.
Wheels and tyres approved by the manufac-
turer can be found on the spare parts list.
If other wheels or tyres are to be used, au-
thorisation from the manufacturer must be ob-
tained beforehand.
–
Contact the authorised service centre re-
garding this matter.
When changing wheels or tyres, always en-
sure that the industrial truck does not tilt to
one side (e.g. always replace the left-hand
and right-hand wheels at the same time).
Changes must only be made following consul-
tation with the manufacturer.
–
Contact the authorised service centre re-
garding this matter.
Medical devices
WARNING
Electromagnetic interference may occur on medical
devices!
Only use equipment that is sufficiently protected
against electromagnetic interference.
Medical equipment, such as pacemakers or
hearing aids, may not work properly when the
industrial truck is in operation.
–
If a driver of the industrial truck or persons
who regularly work in the vicinity of industri-
al trucks use such medical devices, a doc-
tor or the manufacturer of the medical devi-
ces should confirm that these devices are
Safety
2
Basic principles for safe operation
32 50078078001 EN - 07/2022 - 04