Still LXT 120, Original Instructions Manual

Page: 68 / 324

The pedal must have a slight pedal clearance.
The brake must then have a noticeable pres-
sure point.
–
Accelerate the unladen industrial truck in a
clear area.
–
Press the brake pedal (1) firmly.
The industrial truck must decelerate noticea-
bly.
CAUTION
If the pressure point of the service brake is felt with
a noticeable delay, the brake pipe probably has a
leakage or contains air.
–
Do not move the industrial truck; call the author-
ised service centre.
Checking the regenerative brake
DANGER
Risk of accident!
The regenerative brake may not be sufficient for
emergency braking.
–
Always actuate the brake pedal (1) for emergency
braking.
DANGER
Risk of accident due to excessive speed!
Depending on the charging state of the battery,
regenerative braking may be insufficient for down-
hill driving, meaning that the permissible maximum
speed of the truck is exceeded.
In this case, an acoustic and a visual alarm in the
display of the display unit indicates that the permissi-
ble maximum speed has been exceeded.
–
Actuate the brake pedal (1).
The industrial truck is braked electrically if the
driving speed is lowered or the opposite drive
direction is selected.
–
Release the accelerator pedal (2).
–
The industrial truck must brake immediately
until it comes to a standstill.
1
2

Operation
4
Checks and tasks before daily use
56 50078078001 EN - 07/2022 - 04