Still LXT 120 Original Instructions Manual Download

Page: 269 / 324

–

Press the softkey.

The first menu level appears.

–

Activate the "Access authorisation for the

fleet manager".

–

Press the

Service

softkey.

The "Service menu" opens on the display.

–

Press the

Maintenance interval

softkey.

This menu shows the operating hours remain-

ing until the next scheduled maintenance in-

terval or the latest date of the next scheduled

maintenance interval.
The next maintenance due date can be set

up and adjusted by the fleet manager. See

the next section "Setting up and adjusting the

due date counter for maintenance and safety

checks".

NOTE

The maintenance interval can also be config-

ured in the status line.

Information for carrying out

maintenance

This section contains all the information re-

quired to determine when the truck requires

maintenance. Carry out maintenance work

within the time limits according to the hour

meter and using the maintenance check lists

below. This ensures that the truck remains

ready for operation and provides optimal per-

formance and service life. It is also a precondi-

tion for any warranty claims.

Maintenance timeframe

If maintenance is needed, the message

Service required

appears on the

display.

–

Arrange for the authorised service centre to

perform the maintenance work on the truck.

–

The maintenance check lists indicate the

maintenance work that is due.

Maintenance

General maintenance information

257

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands