Still LXT 120, Original Instructions Manual

Page: 65 / 324

Component Course of action
Cab
Perform a visual inspection for integrity. Make sure
they are clean (also free of ice).
Clean any foggy, dirty or icy windows before at-
tempting to drive.
Check that the handholds are securely mounted.
Check the doors for damage and ensure that they
are working correctly.
Check that the driver's seat and seat belt are intact
and working correctly.
The entire footwell must be clean and free of ice.
Remove dangerous and slippery substances before
attempting to drive.
Remove from the footwell any objects that could
become wedged behind the pedals and stop the
pedals from moving.
Check that the operating devices of the heating sys-
tem (blower control and air vent control) are working
correctly.
Steps Make sure they are clean (free of ice, not slippery).
Operating devices
Check that the steering column is in the correct
position and is securely fitted.
Battery male connector and plug connec-
tion
Inspect the battery male connector and the plug
connection for moisture or any foreign objects that
may have become lodged and remove as necessa-
ry, e.g. using compressed air.
Visually inspect for sound condition and deforma-
tion.
Check the contacts.
Have damaged battery male connectors replaced
by the authorised service centre.
Battery
Check the charge state of the battery.
Check that the battery interlock is in good condition
and is working correctly.
Emergency off switch Check for correct function.
Seat switch Check for correct function.
Lighting
Check that the lighting is working correctly: driving
light, turn indicators and all additional lighting such
as working spotlights and rotating beacons.
Hydraulics Check the hydraulic oil level.
Protective devices, guard grilles, guards
and brackers
Visually inspect for integrity and correct operation.
Operation
4
Checks and tasks before daily use
53 50078078001 EN - 07/2022 - 04