Still LXT 120 Original Instructions Manual Download

Page: 120 / 324

Drive modes

The drive modes influence the acceleration

and braking characteristics of the electrical

drive.
Two different drive modes are available:
1

"STILL Classic": This is the standard

drive mode. It ensures a balanced ratio of

acceleration and braking characteristics.

The maximum speed is 25 km/h. When

this mode is active, no symbol is shown

on the display.

"Sprint mode": If a more agile overall

driving behaviour is desired, this drive

mode can be switched on. The industrial

truck accelerates faster to the maximum

speed of 25 km/h. Sprint mode is inten-

ded for driving in clear and spacious ter-

rain.

NOTE

If "sprint mode" is used, the energy consump-

tion of the industrial truck is higher. The bat-

tery is therefore discharged more quickly. The

drive units heat up more quickly.

Switching "sprint mode" on and off

–

To switch "sprint mode" on, push the asso-

ciated softkey.

The "sprint mode" symbol

appears in the

display of the display-operating unit. "Sprint

mode" is switched on.

–

To switch "sprint mode" off, push the soft-

key again.

The symbol disappears and the mode is

switched off. The industrial truck is in

STILL Classic mode again.

Switching "sprint mode" off automatical-

If the industrial truck is operated in "sprint

mode" at the maximum performance level, it

will consume more energy. As a result, the

battery is discharged faster and the traction

drives and energy supply may become too

hot.



Operation

Efficiency and drive modes

108

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands