Still LXT 120, Original Instructions Manual

Page: 281 / 324

Replacing the fresh-air filter mat
of the heating system
Regularly clean or replace the filter mat of the
fresh-air inlet for the heating system, especial-
ly if the industrial truck is used in dusty envi-
ronments.
–
If necessary, remove the lamp guard grille
(variant). To do this, loosen the four screws
on the right-hand and left-hand sides of the
grille.
–
Loosen the four M6 socket head screws (1)
of the trademark emblem (2) on the truck
front.
–
Remove the trademark emblem and set it
aside with the four socket head screws.
–
Remove the filter mat (3) and check it for
contamination. Replace the filter mat if it is
grey.
Re-attach the trademark emblem (2). Tighten
the four socket head screws (1).
NOTE
Replace the filter mat at least every two
months.


Maintenance
5
Preserving operational readiness
269 50078078001 EN - 07/2022 - 04