Still LXT 120, Original Instructions Manual

Page: 267 / 324

General maintenance infor-
mation
Personnel qualifications
Only qualified and authorised personnel are
allowed to perform maintenance work. Regu-
lar safety checks and checks after unusual
incidents must be performed by a competent
person. The competent person must conduct
their evaluation and assessment from a safety
standpoint, unaffected by operational and eco-
nomic conditions. The competent person must
have sufficient knowledge and experience to
be able to assess the condition of an industrial
truck and the effectiveness of the protective
devices in accordance with technical conven-
tions and the principles for testing industrial
trucks.
Maintenance personnel for batteries
Batteries must only be charged, maintained
and replaced by personnel who have received
appropriate training in accordance with the in-
structions from the manufacturers of the bat-
tery, battery charger and industrial truck.
–
Observe the handling instructions for the
battery and the operating instructions for
the battery charger.
Maintenance work without special quali-
fications
Simple maintenance work, such as checking
the hydraulic oil level, may be carried out by
untrained personnel. A qualification of the type
held by a competent person is not required
to carry out this work. The required tasks are
described in the chapter entitled "Preserving
operational readiness".
Information for carrying out
maintenance
This section contains all the information re-
quired to determine when your industrial truck
must be serviced. Carry out maintenance work
within the time limits according to the hour
Maintenance
5
General maintenance information
255 50078078001 EN - 07/2022 - 04