Still LXT 120, Original Instructions Manual

Page: 251 / 324

Shown on display Cause/action
Close the restraint sys-
tem
If, for example, the industrial truck is equipped with a
bracket (variant) as a restraint system and the accel-
erator pedal is actuated, this message appears. The
industrial truck will not move.
- Close the restraint system.
Shock event detected
This message appears if the truck control unit detects
very rapid acceleration or deceleration, e.g. in the
event of an accident.
Service required
If the maintenance interval has been reached, this
message appears.
- Contact the authorised service centre.
Service mode active
This message is for the authorised service centre. It
is not displayed when in normal operation.
Close seat belt
If the seat belt (variant) is not fastened, the driving
speed is limited to 4 km/h and this message appears.
- Fasten the seat belt.
Overtemperature: battery
If the truck control unit detects an excessive battery
temperature, this message appears.
- Allow the industrial truck to cool down.
Factory mode active
This message is for the authorised service centre. It
is not displayed when in normal operation.
Top up wiper water
If the wiper water level is low, this message appears.
- Top up the washer fluid reservoir with washer fluid
adapted to the ambient temperature.
Access expired
If the industrial truck is equipped with this variant, this
message may appear.
- See the associated instructions.
Access denied
Access expires in < 1
month
Access expires in < 1 day
Access expires in < 1
week
Access expires in < 2
days
Access expires in < 3
days
Messages about the industrial truck
If messages with a code appear on the dis-
play-operating unit, the truck control unit has
detected a fault. The message with a code is
stored in the message list until the cause of
the message is corrected. The saved messag-
es can be called up from the "message list".
Operation
4
Display messages
239 50078078001 EN - 07/2022 - 04