Still LXT 120, Original Instructions Manual

Page: 51 / 324

Safety tests
Carrying out regular testing on
the industrial truck
The operating company must ensure that the
industrial truck is checked by a competent per-
son at least once a year or following unusual
incidents.
As part of this testing, a complete check of the
technical condition of the industrial truck must
be performed with regard to accident safety.
Furthermore, the industrial truck must be thor-
oughly checked for damage that could have
been caused by improper use. A test log must
be created. The results of the testing must be
retained at least until a further two inspections
have been carried out.
The inspection date is indicated by an adhe-
sive label on the industrial truck.
–
Arrange for the authorised service centre
to perform regular testing on the industrial
truck.
–
Observe the guidelines regarding inspection
work on industrial trucks as specified by
FEM 4.004.
The operating company is responsible for en-
suring that any defects are remedied without
delay.
–
Notify the authorised service centre.
NOTE
In addition, observe the national regulations
for the country of use.
Insulation testing
The insulation of the industrial truck must have
a sufficient insulation resistance. For this rea-
son, insulation testing in accordance with DIN
EN 1175 and DIN 43539, VDE 0117 and VDE
0510 must be conducted at least once a year
as part of the FEM testing.

Safety
2
Safety tests
39 50078078001 EN - 07/2022 - 04