Still LXT 120, Original Instructions Manual

Page: 82 / 324

Switching on
Switching on the key switch
WARNING
Automatic brake function test.
When the industrial truck is switched on, the service
brake performs an automatic self test. The brake is
applied without the driver depressing the brake ped-
al.
–
Therefore, the brake system must not be opened
before the truck is switched on, e.g. to bleed it.
WARNING
Before switching on the industrial truck, all checks
and tasks required before daily use must have been
performed without any defects being identified.
–
Perform the visual inspections and function check-
ing.
–
Do not operate the industrial truck if defects have
been detected; contact the authorised service
centre.
–
Insert the switch key (1) into the key switch
and turn to the "I" position.
NOTE
If the industrial truck is equipped with the "Ac-
cess authorisation with PIN code" variant, the
display initially changes to the input menu for
access authorisation. See the chapter entitled
"Access authorisation with PIN code".
Once the industrial truck is ready for opera-
tion, the main display appears on the display
of the display-operating unit. See the chapter
entitled "Overviews".

Operation
4
Switching on
70 50078078001 EN - 07/2022 - 04