Still LXT 120 Original Instructions Manual Download

Page: 205 / 324

Towing trailers

DANGER

Risk of serious injury or death from tipping truck

and trailer!
Truck and trailer may tip over when driving on steep-

ly sloping terrain.

–

Never negotiate gradients diagonally or cross-

wise.

WARNING

Increased risk of accident due to trailers rolling away!
Using a trailer changes the truck handling character-

istics.

–

When towing, drive in such a manner that the

truck can always be braked safely.

–

Note the clearance circle and turning circle off the

trailer train.

–

Note the tractrix of the trailer train.

NOTE

A trailer train with several trailers cannot

be manoeuvred backwards. Only manoeuvre

trailer trains with single trailers backwards.

–

Ensure that the trailer load is securely lash-

ed.

–

Release trailer brake and remove all wheel

chocks.

–

Determine the width of the widest trailer or

its load to ensure unobstructed passage.

–

Adjust the mirror so that the driver can see

the complete trailer train.

–

Move the truck off slowly to equalise the

play between the tow couplings.

–

Accelerate gently.

–

Reduce speed in good time when the desti-

nation is reached.

–

Brake the truck with the trailers gently. Sud-

den braking may cause the load to become

displaced and the trailers could jack-knife.



Operation

Trailer and load

193

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands