Still LXT 120 Original Instructions Manual Download

Page: 54 / 324

–

Dispose of used battery acid in line with

regulations.

Flammable gases

GEFAHR

Risk of explosion due to flammable

gases!
During charging, the battery releases a

mixture of oxygen and hydrogen (explo-

sive gas). This gas mixture is explosive

and must not be ignited.

–

Make sure that there is always suffi-

cient ventilation in working areas that

are fully or partially enclosed

–

Keep away from open flames and fly-

ing sparks

–

Observe the safety regulations for

handling the battery.

Oils

DANGER

Oils are flammable!

–

Follow the statutory regulations.

–

Do not allow oils to come into contact

with hot engine parts.

–

No smoking, fires or naked flames!

DANGER

Oils are toxic!

–

Avoid contact and consumption.

–

If vapour or fumes are inhaled, move

to fresh air immediately.

–

In the event of contact with the eyes,

rinse thoroughly (for at least 10 mi-

nutes) with water and then consult an

eye specialist.

–

If swallowed, do not induce vomiting.

Seek immediate medical attention.

Safety

Safety regulations for handling consumables

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands