Still LXT 120 Original Instructions Manual Download

Page: 144 / 324

–

If the drive programmes are saved as a

favourite on a softkey, press the "Drive pro-

gramme" softkey until the number of the

desired drive programme is shown on the

display.

The number of dynamic bar segments indi-

cates the driving dynamics of the selected

drive programme.

Selecting drive programme A or

The industrial truck has two driving pro-

grammes for different driving and braking

characteristics.
Unlike the fixed drive programmes "1 to 3", the

programs "A" and "B" can be configured. The

procedure for this is described in the following

section.
The drive programme is selected using the

display-operating unit under the "Drive"

menu item.

–

Press the or softkey to select the

desired drive programme.

–

If the drive programmes are saved as a

favourite on a softkey, press the "Drive pro-

gramme" Softkey until the letter of the

desired drive programme is shown on the

display.

Configuring drive programmes A

and B

The drivers can configure the driving pro-

grammes themselves.



Operation

Driving

132

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands