Still LXT 120, Original Instructions Manual

Page: 244 / 324

WARNING
Risk of component damage!
–
Do not use a faulty change frame. Faulty change
frames must be replaced.
–
Place the battery in the centre of the
change frame. The change frames have a
marking notch (1) at the front stop, which
must be aligned with the middle of the tray.
If the battery is positioned in the centre of the
change frame, it is easier to insert the battery
into the battery compartment of the industrial
truck. The risk of a collision with components
in the battery compartment is reduced.
Change frame types
The following table shows which change
frame fits which wheelbase and under which
material number the frame can be ordered
from the authorised service centre:
Material numbers of the change frames
Tow tractor with
very short wheel-
base
Tow tractor with
short/long wheel-
base
Tow tractor with
very long wheel-
base
Platform tractor
with long wheel-
base
Material num-
ber/model
50074204804 50074204805 50074204806 50074204805
The important data for selecting the correct
change frame can be found on the frame
nameplate (2). It is attached to the front stop
of the change frame.
Nameplate of the change frame
The following information is listed on the
nameplate:
1
The type of change frame
2 The maximum permissible load capacity
(see also the nameplate of the battery)
3 The net weight of the change frame
NOTE
Battery replacement using a hand pallet truck
is allowed only if using the change frame per-
mitted for this purpose.


Operation
4
Replacing and transporting the battery
232 50078078001 EN - 07/2022 - 04