Still LXT 120 Original Instructions Manual Download

Page: 109 / 324

Selecting driver profiles

If the industrial truck is equipped with the "Ac-

cess authorisation with PIN code" or "Fleet-

Manager" variants, the corresponding driver

profile is active after logging in. If the industrial

truck is not equipped with these variants, driv-

ers must select their profiles manually.

NOTE

Access to the settings menu is available only

if the industrial truck is at a standstill and the

parking brake is applied. If the parking brake

is released prematurely, the settings menu will

close.

–

Stop the industrial truck.

–

Apply the parking brake.

–

Press the button.

–

Press the softkey.

–

Press the

Driver profiles

soft-

key .

The orange activation bar displays the current

selection.

–

Press the softkey for the required driver

profile.

The driver profile is active. The driver is gree-

ted with the selected name the next time that

the industrial truck is switched on.

Renaming driver profiles

Driver profiles can be renamed. Drivers can

only rename their own driver profile. The fleet

manager has access authorisation to rename

all driver profiles.

Horst

Lisa

Driver 4

Available storage position 5

Guido

6219_003-294_en



Operation

Driver profiles

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands