Decommissioning
Decommissioning the industrial
truck
If the industrial truck is decommissioned for
more than two months, it must be parked in a
well-ventilated, frost-free, clean and dry room.
The following must be taken into consideration
when doing so:
Course of action before decommission-
ing the industrial truck
–
Thoroughly clean the industrial truck.
–
Check the fill level of the hydraulic oil for the
steering and top up if necessary.
–
Fully charge the battery.
–
Follow the battery manufacturer's instruc-
tions for storing the battery.
–
Apply a thin film of oil or lubricating grease
to all unpainted mechanical parts.
–
Lubricate the industrial truck.
–
Spray all open electrical contacts with a
suitable contact spray.
–
Top up the fuel tank of the heating system
(if applicable).
–
Cover the industrial truck with a cotton
sheet to protect it against dust.
NOTE
Do not use a polythene sheet to cover the in-
dustrial truck as this encourages the formation
of condensation water.
Recommissioning the industrial truck
–
Thoroughly clean the industrial truck.
–
Lubricate the industrial truck.
–
Follow the battery manufacturer's instruc-
tions for recommissioning the battery.
–
Check the hydraulic oil for condensation
water and change the oil if necessary.
Operation
4
Decommissioning
251
50078078001 EN - 07/2022 - 04
Summary of Contents for LXT 120
