Ro*244 automatic tow coupling
(variant)
Important information
NOTE
Only use STILL approved tow couplings for
the tow tractors and the platform tractors.
NOTE
Only the authorised service centre is permitted
to mount or replace the tow couplings. The
approved fasteners, adapter plates and speci-
fied tightening torques must be used for this
purpose.
NOTE
When mounting a different tow coupling, the
authorised service centre must check whether
this tow coupling is permissible for this indus-
trial truck.
NOTE
Observe the chapter entitled "Towing guide-
lines" with regard to towed loads with un-
braked trailers.
NOTE
Also observe the operating instructions sup-
plied with the HSM 2144 tow coupling by the
manufacturer and the information on the iden-
tification plate.
●
Warning: The information in the STILL op-
erating instructions applies in the event that
the information about the support load var-
ies.
Use
The Ro*244 automatic tow coupling can be
mounted on the front and rear of the tow trac-
tor and the platform tractor. It can be used
with towed loads of up to 25 t.
Operation
4
Trailer and load
182
50078078001 EN - 07/2022 - 04
Summary of Contents for LXT 120
