NOTE
When mounting a different tow coupling, the
authorised service centre must check whether
this tow coupling is permissible for this indus-
trial truck.
NOTE
Observe the chapter entitled "Towing guide-
lines" with regard to towed loads with un-
braked trailers.
Using the RO230B tow coupling
The RO230B tow coupling can be used to tow
an industrial truck that is not operational. In
exceptional cases, it is also permitted to use
the tow coupling for manoeuvring. Permanent
towing operation is not permitted.
The RO230B tow coupling is only mounted
on the truck front. It is approved for all truck
variants.
–
Remove the locking hook (1) from the pin
(2).
–
Pull the pin (2) out of the coupling.
–
Insert the towing device (e.g. a tow bar) into
the coupling using the opening provided for
this purpose.
–
Insert the pin (2) through the holes in the
coupling and through the opening of the
towing device.
–
To prevent the pin from slipping out of the
coupling, re-attach the locking hook (1) to
the bottom of the pin.
Operation
4
Trailer and load
192
50078078001 EN - 07/2022 - 04
Summary of Contents for LXT 120
