Still LXT 120, Original Instructions Manual

Page: 132 / 324

–
Turn the set collar (1) and align the sym-
bol for the desired operating stage with the
white mark on the operating lever.
Operating stage Set collar position (1)
Off (A)
Interval (B)
Continuous mode (C)
Washer (D)
Actuating the rear window wiper and
washer
The rear window wiper and washer are actu-
ated via the display-operating unit.
–
To activate the "On" operating stage, push
the Softkey for the symbol (1) on the dis-
play-operating unit.
The "On" operating stage is activated. The
symbol (3) appears and the activation bar ap-
pears next to the symbol.
–
To activate the "Intermittent mode" operat-
ing stage, press the Softkey again.
The symbol (2) is highlighted with a dot.
–
To activate the "Washer" operating stage,
press and hold the Softkey. This is possible
at any operating stage.
The "Washer" operating stage is activated.
The symbol (4) is displayed for as long as the
Softkey is pressed.
–
Once the window is clean, release the Soft-
key.


Operation
4
Cab
120 50078078001 EN - 07/2022 - 04