Still LXT 120, Original Instructions Manual

Page: 141 / 324

from obstacles. The load must only be set
down and stored in the designated locations.
The operating company and its representa-
tives must ensure that unauthorised third par-
ties do not enter the working area.
Hazardous areas
Hazardous areas on roadways must be indica-
ted by standard traffic signs or, if necessary,
by additional warning signs.
Visibility when driving and ma-
noeuvring
●
The driver must look in the drive direction
and have a sufficient view of the driving
lane.
●
The driver must be sure that the driving
lane is clear, particularly for reverse travel.
If this is not possible, then a second person
acting as a traffic supervisor must walk in
front of the industrial truck.
●
In such cases, only drive at walking pace
and always take extra care. If the driver los-
es eye contact with the traffic supervisor,
the driver must stop the industrial truck im-
mediately.
●
Always use the rear-view mirrors when ma-
noeuvring. In areas with very poor visibility,
a second person can also be used as a
guide. This applies in particular to the plat-
form tractor with a fabric structure, as the
view to the rear from this tractor is severely
restricted.
●
If visual aids (mirrors, monitors) are re-
quired to achieve sufficient visibility, care-
fully practise driving with these aids. Extra
care must be taken during reverse travel
using visual aids.
●
Any glass and mirrors must always be clean
and free of mist and ice.
Operation
4
Driving
129 50078078001 EN - 07/2022 - 04