background image

WARRANTY COVERAGE :

 

 

 

 

 

 

 

 

 

Daedong-USA, Inc., DAEDONG

 Tractor Division, herein referred to as 

DAEDONG

, undertakes to replace 

or  repair  any  part  of  a 

DAEDONG

  loader  where  damage  has  been  proven  to  be  caused  by  defects  in 

material or workmanship.

This  Warranty  is  valid  for  a  period  of  1  year  from  the  date  of  the  original  retail  sale.  Parts  replaced  or 

repaired under the terms of this Warranty are guaranteed only until the original warranty expires. Warranty 

only applies to the original purchaser.

It is further understood and agreed that the defect should be immediately reported to the Selling Dealer. The 

Selling Dealer will generally perform Warranty repairs or replacements and the Purchaser shall deliver the  

DAEDONG

 loader to the Dealer’s place of business for repair.

The obligation of 

DAEDONG

 to the Purchaser under this Warranty is limited to the repair or replacement of 

defective parts by an authorized 

DAEDONG

 dealer. Repair or replacement in accordance with this Warranty 

shall  constitute  fulfillment  of  all  liabilities  of 

DAEDONG

  and  the  Selling  Dealer  in  respect  to 

DAEDONG

 

loader.

There  are  no  warranties  beyond  those  which expressly  appear  herein. Any  implied  warranty  of 

merchantability or fitness for a particular purpose is specifically excluded here from.

 

WARRANTY CONDITIONS

KL701-AU-00.indd   1

2013-03-29   오전 11:24:43

Summary of Contents for KL701

























































































































Reviews: