Siemens SINUMERIK, Commissioning Manual

Page: 478 / 736

Programming support
3.3 Activating a dialog from the NC program
Expanding the user interface
3-14
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
3.3.7 Example 5: Displaying graphics in the dialog screen
Description
Graphics created with Paintbrush, for example, can be displayed in the dialog by means of a
graphics file specification.
A comment text for the graphic can also be preassigned using the COM file. You can
position this comment text by specifying position parameters.
Note
You can only move the graphic itself by repositioning it in the graphics program.
Selecting
N10
MMC("CYCLES,PICTURE_ON,T_SK.COM,PICTURE8,GUD4.DEF,GRA.BMP,,M1","S")
N20 MMC("CYCLES,PICTURE_OFF","N")
N30 M30
Parameters:
Dialog file (*.COM)
//C8(SCREEN8)
(I///Insert picture no. 2///4000,3000,7500)
(I///Created with Paintbrush ///4000,3250,7500)
Text variable
M1 = ......Example5: Insert picture.......
Pictures are created, e.g., with the "Paintbrush" program. Picture
size: 300X500 pixels, you can only change the picture size with
the graphics program.
([DPSOH,QVHUWSLFWXUH
2.
Figure 3-7 Example 5 with graphic