Siemens SINUMERIK Commissioning Manual Download Page 200

Page: 200 / 736

Tool management

6.2 Settings in the configuration file

HMI Advanced (IM4)

194

Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0

; "Tool / magazine list" main menu, the "Tool details" softkey

; can be replaced by the new "Data management" softkey.

; The "Tool details" softkey is then stored with the same

; functions behind the "Data management" softkey.

; False="Tool details" remains active (default)

; True="Data management" is activated

ACTIVATE_EDGE_MANAGEMENT_IN_LISTS=False

; If adapter data is set in the NCK, then the

; magazine list can be displayed as either a transformed or

untransformed

; list (softkey in ETC menu). The display mode can

; be preset for the boot up of the HMI.

; False = not transformed (default)

; True = transformed

; START_MAGLIST_TRANSFORMED=False

; The "Tool management" softkey in the "Parameters" main menu

; can be used to branch to the list below.

; 0 = standard list depending on the respective NCK version /

; machine data (default)

; 1 = Magazine list

; 2 = Tool list

; 3 = Working offset list

START_LIST=0

; The inch/metric setting is considered for the code carrier

; !! NOTICE: The settings described here are only

; relevant if the MD $MN_CONVERT_SCALING_SYSTEM=1 is set

; in the NC.

; The entry for DATABASE_LENGTH_UNIT is only analyzed if

; no unit was entered in the tool database,

; i.e. once under normal circumstances.

; If it is an old NC without an inch/metric conversion

; function, or if $MN_CONVERT_SCALING_SYSTEM=0,

; then the NC operates without inch/metric conversion. Therefore

; no conversions are carried out in relation to the code carrier

either.

; 1 = No definition for inch/metric in relation to code carrier

(default).

; The setting $MN_CONVERT_SCALING_SYSTEM=1 in the NC means

; that inch/metric conversion is to be used.

; Therefore the user must determine the unit of the data

; on the code carrier or to be written to the code carrier.

; As with setting -1 this does not take place, all softkeys

; for code carrier activities are disabled.

; 0 = mm. It is assumed that the relevant data has been or is to be

; stored on the code carrier in mm.

. If "inch" is set in the NCK

; all softkeys are disabled and code carrier functions start.

; 1 = inch. It is assumed that the relevant data has been or is to

Summary of Contents for SINUMERIK

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands

Siemens SINUMERIK, Commissioning Manual

Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands