Siemens SINUMERIK Commissioning Manual Download Page 25

Page: 25 / 736

HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0

Configuring the HMI system

2.1

Processing INI files

Notation

[xxx]

;Designating a section

Identifier=value

;Value assignment

Identifier=<empty>

;Delete value

;Separator (comma) for multiple assignments

;

;Introduction of comment: As a general rule, comments indicate

the range of values

REM

;Introduction of comment

Directory structure

The system directory structure is organized in such a way that user changes are retained if

the software is upgraded.
●

User changes to the original software are made in parallel directories.

●

There is a clear separation between standard HMI software and customer-specific

enhancements.

●

The "mmc2" and "hmi_adv" directories (and their subdirectories) should be read-only

directories. They contain the original software supplied. These directories are overwritten

only if the software is upgraded.

The diagram below shows the priority sequence. This means that: Entries in the directory to

the right overwrite corresponding entries in directories to the left.

Summary of Contents for SINUMERIK

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands

Siemens SINUMERIK, Commissioning Manual

Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands