Siemens SINUMERIK Commissioning Manual Download Page 686

Page: 686 / 736

Configuring the system

2.4 PCU 50.3 with SITOP UPS module

PCU-Basesoftware (IM8)

Commissioning Manual, 03/2009, 6FC5397-1DP10-4BA0

2.4

PCU 50.3 with SITOP UPS module

Conditions

●

PCU-Basesoftware WinXP V08.00.00 or higher for USB port

●

HMI Advanced of V07.01.00 or higher

●

SITOP software, version 2.5.2.4or higher is installed:
SITOP software is available to download from: www.automation.siemens.com/sitop.

●

SITOP monitor/configuration program is installed:
To enable this, the SITOP software must be copied to the E:\SITOP directory set up on

the PCU. This directory already contains PCU tools required for shutdown on the SITOP

UPS. If this directory does not exist in an older version of the PCU-Basesoftware, it must

be created so that it will be compatible for any subsequent updating of the PCU-

Basesoftware.

●

UPS USB driver for Windows XP is installed:
Installation is described in the relevant SITOP documentation. The documentation is part

of the SITOP software download package.

●

The SITOP UPS hardware is connected.

NOTICE

The SITOP software version 3.1.0.6 can be operated with PCU-Basesoftware

V08.02.00.01 or higher subject to the following conditions:

•

SITOP software must not be installed as a Windows service, but must be started as

a normal application (as described in the chapter titled "Starting and configuring the

SITOP monitor").

•

The SITOP service prevents the correct switch-off procedure being performed on the

SITOP UPS module when PCU-Basesoftware is installed.

Application

If the supply voltage at the PCU dips, the SITOP UPS modules below could maintain

operation for a limited period if a backup battery is being used, allowing the PCU to be

properly shut down before the battery is exhausted:

Name

Order number (MLFB)

SITOP POWER DC UPS module 15 (USB interface)

6EP1931-2EC41

Note
Information about the test environment for machine OEMs
The "SITOP UPS" function has been tested in the standard configuration of HMI Advanced.

When installing add-on or OEM software components, the shutdown procedure of the

complete system has to be checked by the operator.

Summary of Contents for SINUMERIK

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands

Siemens SINUMERIK, Commissioning Manual

Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands