Siemens SINUMERIK Commissioning Manual Download Page 158

Page: 158 / 736

Diagnostics and service

5.6 Action log

HMI Advanced (IM4)

152

Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0

5.6

Action log

5.6.1

Setting the action log

Overview

The "action log" function can be used to log operating sequences. By default, if the action log

is enabled, the data that can be logged are recorded. The action log setting is password-

protected (access level 3: end user).
Using the operating area "Start-up" → "HMI" → "System Settings,“ select which actions of the

control should be logged in the "Action log settings":

Figure 5-7

Action log settings

Logging on/off

Additional settings:

•

The path of the log file is permanently set and cannot be changed.

•

File size of log file:

in bytes

•

Transmission Write interval:

− 1: The log is only saved to hard disk upon request,

e.g. trigger, (default setting).
> 0: The longest waiting time in seconds before a log file

is saved on hard disk.

•

Program status when an

alarm occurs:

Alarm number entry separated by a comma: The alarms

entered here are immediate triggers for immediately

saving the current action log on the hard disk.

Summary of Contents for SINUMERIK

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands

Siemens SINUMERIK, Commissioning Manual

Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands