Siemens SINUMERIK, Commissioning Manual

Page: 579 / 736

Programming help systems
1.2 Quick "ASCII" help
Online Help (HE1)
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
17
Instruction text
An instruction text could be "G17", for example. This text is transferred to the part program
currently being edited when the
"Transfer to editor" command is issued.
The instruction text can be approx. 12 characters long.
Descriptive text
The descriptive text is the help text which describes the instruction in more detail.
The length of the descriptive text is limited by the display and must not exceed 40 characters
with a standard text size of 8 pt, for example.
Multiple jumps
Several help references can be stored in ring formation (i.e., the first help is displayed again
after the last help) for each help element.
E.g.:
m,t/14/"Hlp.pdf",1,"Help1",,2,"Help2","Help3.pdf",3,,/
CYCLE82/drilling cycle, drilling, counterboring
I.e.:
• Entry in help text ring
File: HLP.PDF
Index: 1
Text: Help1
•
Entry in help text ring
File: HLP.PDF
Index: 2
Text: Help2
•
Entry in help text ring
File: HELP3.PDF
Index: 3
Text: Help2
The components of a block are remembered by the previous block, as illustrated in the
example, so as to avoid repetitions. Only complete blocks are transferred.
Note
Two commas must be inserted in the "Extended help" parameter even if no entries need to
be made.