Siemens SINUMERIK, Commissioning Manual

Page: 703 / 736

Backing up and restoring data
4.1 Backing up and restoring data
PCU-Basesoftware (IM8)
Commissioning Manual, 03/2009, 6FC5397-1DP10-4BA0
63
4.1.2 Starting ServiceCenter Backup Restore
Starting ServiceCenter Backup Restore
You start the ServiceCenter Backup Restore for the following tasks:
●
Backing up/restoring data
–
Starting via linking from the service desktop
– Starting during boot up via entry in the "background" under SINUMERIK
● From the service system in the event of service
● When installing a replacement hard disk
In order to ensure that the user is authorized to carry out service tasks, direct access is
password-protected during boot up of the PCU. This password can be changed.
NOTICE
If you start the ServiceCenter Backup Restore via the service desktop from a service
system or when installing a replacement hard disk, no password is needed.
The following dialog appears after you double-click the ServiceCenter Backup Restore link
on the service desktop:
Start ... With "Start," you start the shutdown of the system and the start of the
ServiceCenter.
Settings ... With "Settings," you open the dialogue box for network settings.
Show File ... Under "Show File," you can view the log of the last data back up.
Set password ... This is where you enter a new password for ServiceCenter Backup Restore.
(the default is the same as for the service user "auduser".)
Exit Cancel and return to the service desktop.
Figure 4-1 Starting service