Siemens SINUMERIK, Commissioning Manual

Page: 461 / 736

Programming
2.8 Operators
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
2-111
VAR1 contains the number to be rounded. The parameter “4” indicates the number of
decimal places in the result, which is placed in VAR2.
Trigonometric functions
Trigonometric functions Identifier
SIN(x) Sine of x
COS(x) Cosine of x
TAN(x) Tangent of x
ATAN(x, y) Arc tangent of x/y
SQRT(x) Square root of x
ABS(x) Absolute value of x
SDEG(x) Conversion to degrees
SRAD(x) Conversion to radian
Note
The functions operate with radian measure. The functions SDEG() and SRAD() can be used
for conversion.
Example:
VAR1.VAL = SQRT(2)
Constants
Constants
PI 3.14159265358979323846
FALSE 0
TRUE 1
Example:
VAR1.VAL = PI
Relational operators
Relational operators
== Equal to
<> Not equal to
> Greater than
< Less than
>= Greater than or equal to
<= Less than or equal to