Siemens SINUMERIK, Commissioning Manual

Page: 250 / 736

Tool management
6.4 Job processing of tools
HMI Advanced (IM4)
244
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
6.4 Job processing of tools
Prerequisite
The settings for batch processing of tools are contained in paramtm.ini and
language\patm_xx.ini in the section [BatchTools].
The filter only works if bit 4 is set in MD 18080: TOOL_MANAGEMENT_MASK.
Up to 6 search filters can be defined. The following can be specified for each filter: Softkey
text, results title, search criteria, selection of the type of results list and additional data.
The file ...user\paramini.out contains error messages which occurred when reading in the
parameter assignment.
6.4.1 Settings that apply for all filters at the same time
Colors for the results list
The colors for the results list are customizable. When setting colors, please avoid color
combinations that are difficult to read or too bright.
The colors have to be specified for the following list elements:
●
Non-selected text
● Non-selected background
● Cursor-selected text
● Cursor-selected background
● Job-selection and cursor-selected text
● Job-selection and cursor-selected background
● Job-selection and cursor-selected text
● Job-selection and cursor-selected background
The parameter settings consist of eight colors separated by comma. A hexadecimal value
consisting of 8 characters is assigned to each color.
The hex value has the following syntax:
SSBBGGRR where SS=System, BB=Blue, GG=Green, RR=Red
Examples for colors:
●
80 00 00 08: Windows text
● 80 00 00 05: Windows background
● 80 00 00 0E: Highlighted Windows text
● 80 00 00 0D: Highlighted Windows background
● 80 00 00 09: Windows active window, header text
● 80 00 00 02: Windows active window, header background
● 00 FF FF 00: Light blue