Siemens SINUMERIK, Commissioning Manual

Page: 3 / 736

Base software and HMI Advanced
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
3
Preface
SINUMERIK documentation
The SINUMERIK documentation is organized in three parts:
● General documentation
● User documentation
● Manufacturer/service documentation
An overview of publications, which is updated monthly and also provides information about
the language versions available, can be found on the Internet at:
http://www.siemens.com/motioncontrol
Follow menu items "Support" → "Technical Documentation" → "Ordering Documentation" →
"Printed Documentation".
The Internet version of DOConCD (DOConWEB) is available under:
http://www.automation.siemens.com/doconweb
Information about training courses and FAQs (Frequently Asked Questions) can be found at
the following website:
http://www.siemens.com/motioncontrol under menu item "Support".
Target group
This documentation is intended for commissioning personnel.
The plant/product is installed, connected, and ready to start. The Commissioning Manual
ought to contain all necessary information about or at least references to subsequent
procedures such as testing the cabling, power on, and functional testing.
Benefits
The intended target group can use the Commissioning Manual to test and commission the
product/system correctly and in total safety.
Utilization phase: Setup and commissioning phase
Standard scope
The functionality of the standard scope is described in the following documentation. The
machine manufacturer documents supplements or changes that he makes (the machine
manufacturer).
Other functions not described in this documentation might be executable in the control.
However, no claim can be made regarding the availability of these functions when the
equipment is first supplied or in the event of servicing.