Siemens SINUMERIK Commissioning Manual Download Page 414

Page: 414 / 736

Programming

2.6 Methods

Expanding the user interface

2-64

Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0

2.6.2

FOCUS

Description

The FOCUS method is executed if the focus (cursor) is positioned on another field in the

dialog.
The FOCUS method must not be initiated as a result of a navigation event. The cursor may

only be moved in softkey PRESS blocks, CHANGE blocks, etc. Responses to cursor

movements are are predefined and cannot be modified.

Note
Within the FOCUS block, it is not possible to select a different variable, nor can a new dialog

be loaded.

Programming

Syntax:

FOCUS
...
END_FOCUS

Description:

Positions the cursor

Parameters:

- None -

Example

FOCUS

DLGL("The focus has been placed on variable" << FOC << ".)

º º

END_FOCUS

2.6.3

LOAD GRID

Description

The table description can be made available dynamically within the LOAD block using the

LG method.
In order to assign a table using the LG method, the variable must have already been defined

as a grid variable and cross-referenced to an existing, valid table.

Summary of Contents for SINUMERIK

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands

Siemens SINUMERIK, Commissioning Manual

Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands