Siemens SINUMERIK, Commissioning Manual

Page: 256 / 736

Tool management
6.4 Job processing of tools
HMI Advanced (IM4)
250
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
Example 4:
"/Tool/MagazineDescription/userData[u#TOA#,c#MAG,1](l)"
Magazine OEM parameter 1
Placeholder
The following placeholders are permissible:
#TOA#
TOA number (of the current channel)
#TNO# Internal T number (of the tool found)
#MAG# Magazine number (of the tool found)
#RES# Standard value for the number of decimal places
Placeholders are substituted by the data for the current tool or by general settings.
Max. 1 OPI item is permitted.
OPI multiple variable accesses are generated internally from the OPI item.
"(|)" is entered in front of the result data to generate the data separation character "|".
The OPI item must be enclosed by " " especially if it contains formatting information (e.g.
"!l%ld") enclosed by " ".
The syntax is not checked by the operator interface software. The person setting the
parameters is responsible for the correct syntax.
Note
If errors are made in the parameter settings, the result list can no longer be displayed or the
secondary faults can occur.
Filter name and softkey text
You can set one name and one softkey text in each language for each filter.
There are two settings for each filter:
●
n_FindResultHeadlineText
Text for filter name or reference
● n_FindSoftkeyText
Softkey text for the filter or reference (a double blank in the text defines a new line)
Example:
Paramtm.ini, [BatchTools]:
1_FindResultHeaderText = R1HL
1_FindSoftkeyText = F1SK
language\patm_gr.ini, [BatchTools]:
R1HL = "prewarning limit reached or disabled"
F1SK = "prewarning or disabled"