Siemens SINUMERIK Commissioning Manual Download Page 616

Page: 616 / 736

Input of Text

3.2 Inputting characters via the Character Map

Generating target language texts (TX2)

Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0

Disruptive Word options

Deactivate the following options in Word to prevent unwanted characters from reaching the

text:
In the dialog box "Tools" → "AutoCorrect Options" go to the "AutoFormat as you type" tab

and under "Replace as you type" check:

•

"Straight quotes" with "Smart quotes"

•

English ordinals (1st) with superscript

•

Fractions (1/2) with fraction character (½)

•

Special characters (--) with symbols (—)

"Apply as you type":

•

Automatic bulleted lists

•

Automatic numbered lists

If you do leave any of the options active then you can always use Ctrl+Z to undo any

automatic corrections. As a general rule this will give the same results as if the option was

deactivated.

3.2

Inputting characters via the Character Map

Note
The Character Map integrated in Word (menu commands "Insert" → "Symbol...") is not

suitable for generating code page-encoded text files, as it cannot be limited to the relevant

code page.
Use the "Character Map" system program as described below.

Selecting the Character Map

In the start menu:
select "Programs" → "Accessories" → "System Tools" → "Character Map" to start the

"Character Map" tool.

From "Font", choose the same font type as you have selected for the text file.

Summary of Contents for SINUMERIK

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands

Siemens SINUMERIK, Commissioning Manual

Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands