Shibaura CA20-M10, Operating Manual, Page: 305 / 384

18
– 5
BRAC
[Function] The command BRAC is used to jump to a program to the tag No. which is the
resultant value of a counter No. plus the set counter value.
[Key operation]
STEP 1
Press
F 1
followed by
OUT
2
and
RET
0
.
NOP changes to BRAC.
Press
ENT
.
STEP 2
Enter the counter No. with the numeric keypad.
Press
ENT
. (Input range: 1 to 99)
STEP 3
Enter the counter setting value with the numeric
key-pad. Press
ENT
. (Input range: 0 to 999)
NOTE

The control jumps to the tag No. which is the resultant value of the counter value +
counter Nos. The counter content will remain unchanged after the execution of this
command.

When the counter value details are "0" and the number to be added is "0", if the
command is executed, the "TAG NOT FOUND" error will occur.

If any total of (counter value) + (setting value) exceeds "999", "TAG NO. error" will
occur.
[ P R G M ]
0 0 0 1
N O P
[ P R G M ]
0 0 0 1
B R A C [ 0 1 ] + 0 0 0
Counter jump