Shibaura CA20-M10, Operating Manual, Page: 319 / 384

18
– 19
JMP
[Function] The control jumps to a specified tag No.
[Explanation]

This command is used to instruct a program to jump unconditionally to a
step specified by a tag No.

Refer to the TAG command for usage examples.
[Key operation]
STEP 1
Press
JMP
5
.
NOP changes to JMP.
Press
ENT
.
STEP 2
After entering a tag No. with the numeric
keypad, press
ENT
.
(Input range: 1 to 999.)
NOTE

The tag No. for STEP 2 can be set to "0" as a temporary value. However, if the
command is executed with that value, the "NO TAG FOUND" error will occur.

When using multitasking, a tag No. in another task cannot be jumped to.
[ P R G M ]
0 0 0 1
J M P 0 0 0
[ P R G M ]
0 0 0 1
N O P
Unconditional Jump