Shibaura CA20-M10, Operating Manual, Page: 261 / 384

13
– 17
Set PARA mode to input parameter 2. (Refer to section 13.1.)
STEP 1 When this display is shown, press
F 3
.
STEP 2
Press
ENT
to change parameter 2 and go to
STEP 3.
Press
ESC
to ignore changes and return to
the previous screen.
STEP 3
Use
NEXT
and
-NEXT
to move to the K01 to
K19 parameter setting screens from this state.
To end the parameter setting, press
ESC
.
Press
ESC
to move to step 4.

Search function
When
SEARCH
is pressed and the parameter No. 1 to 19 is input, the parameter 2 setting
screen can be searched.

Jump function
When
F 1
is pressed in K01 to K09, K10 appears, when
F 1
is pressed in K10 to K19,
K01 appears.
STEP 4
This is the parameter 2 end screen.
Follow the instructions on the screen, and turn
the power OFF. The parameter 2 setting will be
validated when the power is turned ON again.
[ P A R A ] K 0 1
A X I S N U M B E R S E T T I N G
A 0 A 1 A 2 A 3
[ X ] [ X ] [ X ] [ X ]
[PARA]M09
DISPLAY J:JAPANESE
E:ENGLISH
[J ]
[PARA]M09
DISPLAY J:JAPANESE
E:ENGLISH
[J ]
[ P A R A ] F 1 : S E T M O D E
F 2 : P A R A M E T E R 1
F 3 : P A R A M E T E R 2
F 4 : T A B L E
[ P A R A ]
C H A N G E P A R A M E T E R 2
Y
E S : E N T N O : E S C
P
L E A S E P O W E R O F F ! !
Parameter No.